Click
here to see list of
tiles we offer
Unit-I
Unit I manufacturing tiles has product
range that includes Modular Granite
Tiles in the following sizes:
The Tiles Unit
of
AGIL
has an installed
capacity of
1,80,000 Sq.
mtrs and is
equipped with a
processing line
from some of the
world's leading
manufacturers. A
strict 100%
inspection
system is
adopted during
all stages of
manufacturing
process.
The Modular
Granite Tiles
from Aro Granite
Industries Ltd.
are available in
the following
dimensions.
-
305 x 305 x
10mm or
12"x12"x3/8"
-
610 x 305 x
10mm or
24"x12"x3/8"
-
400 x 400 x
10/12mm or
16"x16"x3/8"/
1/2"
-
457 x 457 x
12mm or
18"x18"x1/2"
-
Free
Length
strips
(500 ~
800mm) x
300mm x 12mm
/ 15mm
-
Skirtings
(one length
side
polished and
bevelled)
Free length
( 500 mm ~
800 mm) x
80mm x 10mm
AGIL
also offers
Granite
Tiles to
customer's
specific
requirement.
Process
Plan for Tiles
The
Raw material required for the granite
tiles production is rough granite
blocks. As per the market requirement
rough granite blocks Are produced
from different quarries situated
mostly in Tamil Nadu, Andra Pradesh,
Karnataka and Orissa.The rough granite
blocks are properly dressed in the
wire saw machine if required otherwise
directly Loaded on the block cutter
trolley. The bottom of the blocks
are P.O.P Applied and dried for
a few hours.
The
block cutter trolleys are moved inside
the blocks cutting machines where
it is cut into strips. For cutting
the blocks diamond discs are used.
The cut strips are then calibrated
in the grinding machine. After calibration
the strips will be of uniform thickness
and ready for either polishing or
flaming.
-
Polishing:
The calibrated strips are passed
in the polishing machine, which
are having 17 heads fitted with
different grades of abrasives.
-
Flaming:
The
calibrated strips are heated using
flaming torches in wet conditions.
This will give rough finish appearance.
After polishing of flaming the strips
are cut into tiles of standard sizes
as per the market requirements in
the cross cutting machine. The tiles
are finally ground using the side
calibrator for accurate size and
then pass on to the chamfering machine
where all the four sides of the
tiles are beveled. After chamfering
the tiles are inspected and packed
in Styrofoam boxes and then in Export
worthy wooden crates.
Unit
II
The company expanded its activities
and set up facilities at Unit II
for manufacturing Granite Slabs
where, the commercial production
started in October 2001. This unit
has a product range that includes
the following:
- Granite
Random Slabs (Polished / Flamed
/ Honed / Brush Finish)
- Size : 3.00 ~ 3.40 Meters.
Length x 1.80 ~ 2.00 Meters.
Width
- Thickness : 20mm./30mm./40mm.
ABOUT
